Das Oszi-Projekt f\u00fcr das STM32F746-Disco Board ist im Moment noch
\nin der Beta Phase also noch nicht fertig.<\/p>\n
Bilder :<\/strong><\/p>\n <\/p>\n <\/p>\n <\/p>\n <\/p>\n<\/div>\n Funktionen :<\/strong><\/p>\n -Untermen\u00fcs f\u00fcr Settings (Oben, Unten, Rechts, Links) (Drag&Drop mit zwei Fingern) Hinweise zur Beta :<\/strong> Vom Funktionsumfang sollte es zum Schlu\u00df das gleiche machen, Wenn ihr Vorschl\u00e4ge oder Ideen habt, schreibt hier. W\u00e4hrend der Beta gibts nur das HEX-Files zum rumspielen :<\/p>\n Version : B.21 vom 28.03.2016 Oszi II f\u00fcr STM32F746, Version Beta 2.1, 1 Kanal Version<\/p>\n\n
![\"Mode](\"wp-content\/uploads\/2016\/03\/oszi2_vb15_normal-150x150.jpg\")
<\/a><\/dt>\n\n
![\"Channel](\"wp-content\/uploads\/2016\/03\/oszi2_vb15_panel1-150x150.jpg\")
<\/a><\/dt>\n\n
![\"Trigger](\"wp-content\/uploads\/2016\/03\/oszi2_vb15_panel3-150x150.jpg\")
<\/a><\/dt>\n\n
![\"Cursor](\"wp-content\/uploads\/2016\/03\/oszi2_vb15_panel2-150x150.jpg\")
<\/a><\/dt>\n\n
![\"Global](\"wp-content\/uploads\/2016\/03\/oszi2_vb20_panel4-150x150.jpg\")
<\/a><\/dt>\n\n
![\"Cursor](\"wp-content\/uploads\/2016\/03\/oszi2_vb15_cur2-150x150.jpg\")
<\/a><\/dt>\n\n
![\"Cursor](\"wp-content\/uploads\/2016\/03\/oszi2_vb15_cur1-150x150.jpg\")
<\/a><\/dt>\n\n
![\"max](\"wp-content\/uploads\/2016\/03\/oszi2_vb15_4ch-150x150.jpg\")
<\/a><\/dt>\n\n
![\"Grid](\"wp-content\/uploads\/2016\/03\/oszi2_vb19_grid2-150x150.jpg\")
<\/a><\/dt>\n\n
![\"Grid](\"wp-content\/uploads\/2016\/03\/oszi2_vb20_grid3-150x150.jpg\")
<\/a><\/dt>\n\n
![\"display](\"wp-content\/uploads\/2016\/03\/oszi2_vb20_points-150x150.jpg\")
<\/a><\/dt>\n
\n-4 Kan\u00e4le (im Moment noch etwas verbuggt)
\n-900 Datenpunkte pro Kanal
\n-Horizontal : 5,0s\/div bis 25us\/div
\n-Vertikal : 5,0V\/div bis 0,1V\/div
\n-Cursor (f\u00fcr Zeit und Spannungs Achse)
\n-Trigger Modes (Auto, Normal, Single, Roll)
\n-Start\/Stop Button
\n-Drehknopf zum verstellen
\n-Drag&Drop der Linien und der Zeitachse
\n-drei Grid Layouts (mit einstellbarer Helligkeit)
\n-Spannungsverlauf als Linie oder Punkte darstellbar
\n-Trigger Hysterese einstellbar
\n(Vorsicht !! Mess-Spannung begrenzen !! auf +0,0V bis +3,3V !!<\/span>)
\n-CH1 an PF10 (CN5\/2)
\n-CH2 an PF9 (CN5\/3)
\n-CH3 an PF8 (CN5\/4)
\n-CH4 an PF7 (CN5\/5)<\/p>\n
\nDie GUI ist soweit fertig, Trigger-Modes sollten jetzt auch ok sein,
\nim Moment funktioniert die 4 Kanal Version nicht richtig
\nund bleibt ab und zu h\u00e4ngen.<\/p>\n
\nwie mein Oszi vom STM32F429 (vlt auch mehr ![\":-)\"](\"wp-includes\/images\/smilies\/icon_smile.gif\"){kind=icon}
<\/p>\n
\n(auch zur Bedienung)<\/p>\n
\nDownload HEX (1 Kanal Version ) :
\n![\"F746_Oszi_II_vb20\"](\"http:\/\/mikrocontroller.bplaced.net\/wordpress\/wp-content\/uploads\/2019\/11\/stm32_bin_file_64x64.png\")
<\/div>
<\/p>\n
<\/p>\n
Hallo.<\/p>\n
Vielleicht k\u00f6nnten Sie es tun, 6Msps Einkanal-Sampling?<\/p>\n
George<\/p>\n<\/div>\n<\/div>\n
<\/p>\n
\n- \n
\n![\"\"](\"http:\/\/0.gravatar.com\/avatar\/67426419ead44d5afa132e92685bb460?s=40&d=http%3A%2F%2F0.gravatar.com%2Favatar%2Fad516503a11cd5ca435acc9bb6523536%3Fs%3D40&r=G\")
admin_ub<\/cite> sagt:<\/span><\/div>\n16. M\u00e4rz 2016 um 20:55<\/div>\n\n- \n
\n![\"\"](\"http:\/\/0.gravatar.com\/avatar\/e722f45d4a7418a88b0b5c29c19f2ffb?s=40&d=http%3A%2F%2F0.gravatar.com%2Favatar%2Fad516503a11cd5ca435acc9bb6523536%3Fs%3D40&r=G\")
Simko Gyorgy<\/cite> sagt:<\/span><\/div>\n17. M\u00e4rz 2016 um 16:24<\/div>\n\n![\":)\"](\"http:\/\/mikrocontroller.bplaced.net\/wordpress\/wp-includes\/images\/smilies\/icon_smile.gif\")
<\/p>\n<\/div>\n<\/div>\n
- \n
\n![\"\"](\"http:\/\/0.gravatar.com\/avatar\/e722f45d4a7418a88b0b5c29c19f2ffb?s=40&d=http%3A%2F%2F0.gravatar.com%2Favatar%2Fad516503a11cd5ca435acc9bb6523536%3Fs%3D40&r=G\")
Simko Gyorgy<\/cite> sagt:<\/span><\/div>\n18. M\u00e4rz 2016 um 22:24<\/div>\n\n
<\/p>\n
<\/p>\n
i\u2019ll try my best![\":-)\"](\"http:\/\/mikrocontroller.bplaced.net\/wordpress\/wp-includes\/images\/smilies\/icon_smile.gif\")
<\/p>\n<\/div>\n<\/div>\n
<\/li>\n<\/ul>\n<\/li>\n
<\/p>\n
<\/p>\n
<\/li>\n
<\/p>\n
<\/p>\n
Hallo![\":)\"](\"http:\/\/mikrocontroller.bplaced.net\/wordpress\/wp-includes\/images\/smilies\/icon_smile.gif\")
\nIch wieder.
\nIch denke, es kann in Kreis DMA und Analog-Watchdog-Kombination aus der Pre-Trigger-Signal gespeichert werden. Setzen Sie Triggerposition Standort?
\n(Sorry, Google \u00dcbersetzung aus dem Ungarischen)
\nGr\u00fc\u00dfe, George<\/p>\n<\/div>\n<\/div>\n
<\/p>\n
\n- \n
\n![\"\"](\"http:\/\/0.gravatar.com\/avatar\/67426419ead44d5afa132e92685bb460?s=40&d=http%3A%2F%2F0.gravatar.com%2Favatar%2Fad516503a11cd5ca435acc9bb6523536%3Fs%3D40&r=G\")
admin_ub<\/cite> sagt:<\/span><\/div>\n19. M\u00e4rz 2016 um 10:41<\/div>\n\n
<\/p>\n
<\/p>\n
please write in english![\":-)\"](\"http:\/\/mikrocontroller.bplaced.net\/wordpress\/wp-includes\/images\/smilies\/icon_smile.gif\")
<\/p>\n<\/div>\n<\/div>\n
<\/p>\n
\n- \n
\n![\"\"](\"http:\/\/0.gravatar.com\/avatar\/e722f45d4a7418a88b0b5c29c19f2ffb?s=40&d=http%3A%2F%2F0.gravatar.com%2Favatar%2Fad516503a11cd5ca435acc9bb6523536%3Fs%3D40&r=G\")
Simko Gyorgy<\/cite> sagt:<\/span><\/div>\n19. M\u00e4rz 2016 um 14:53<\/div>\n\n- \n
\n![\"\"](\"http:\/\/0.gravatar.com\/avatar\/e722f45d4a7418a88b0b5c29c19f2ffb?s=40&d=http%3A%2F%2F0.gravatar.com%2Favatar%2Fad516503a11cd5ca435acc9bb6523536%3Fs%3D40&r=G\")
Simko Gyorgy<\/cite> sagt:<\/span><\/div>\n19. M\u00e4rz 2016 um 22:08<\/div>\n\n
<\/p>\n
<\/p>\n
Only the Hungarian language I speak.![\":(\"](\"http:\/\/mikrocontroller.bplaced.net\/wordpress\/wp-includes\/images\/smilies\/icon_sad.gif\")
\nThe English text written me somewhat.<\/p>\n<\/div>\n<\/div>\n
<\/li>\n<\/ul>\n<\/li>\n<\/ul>\n<\/li>\n
<\/p>\n
<\/p>\n
knob should point only to animate.
\nMoving the shadow creates the effect as if the light source is moving.<\/p>\n<\/div>\n<\/div>\n
<\/p>\n
\n- \n
\n![\"\"](\"http:\/\/0.gravatar.com\/avatar\/67426419ead44d5afa132e92685bb460?s=40&d=http%3A%2F%2F0.gravatar.com%2Favatar%2Fad516503a11cd5ca435acc9bb6523536%3Fs%3D40&r=G\")
admin_ub<\/cite> sagt:<\/span><\/div>\n20. M\u00e4rz 2016 um 10:08<\/div>\n\n
<\/p>\n
<\/p>\n
thats the smallest problem and the last one on my list. Draw a tileset by your own and send it to me.<\/p>\n<\/div>\n<\/div>\n
<\/p>\n
\n- \n
\n![\"\"](\"http:\/\/0.gravatar.com\/avatar\/e722f45d4a7418a88b0b5c29c19f2ffb?s=40&d=http%3A%2F%2F0.gravatar.com%2Favatar%2Fad516503a11cd5ca435acc9bb6523536%3Fs%3D40&r=G\")
Simko Gyorgy<\/cite> sagt:<\/span><\/div>\n25. M\u00e4rz 2016 um 13:45<\/div>\n\n
<\/p>\n
<\/p>\n
Hello<\/p>\n
I made use of two series of the knob.
\n96\u00d796 pixel 12 and 24 move layer.<\/p>\n<\/div>\n<\/div>\n
<\/p>\n
\n- \n
\n![\"\"](\"http:\/\/0.gravatar.com\/avatar\/67426419ead44d5afa132e92685bb460?s=40&d=http%3A%2F%2F0.gravatar.com%2Favatar%2Fad516503a11cd5ca435acc9bb6523536%3Fs%3D40&r=G\")
admin_ub<\/cite> sagt:<\/span><\/div>\n25. M\u00e4rz 2016 um 19:51<\/div>\n\n- \n
\n![\"\"](\"http:\/\/1.gravatar.com\/avatar\/511a3dc107bfb2f5deca8e90d0872630?s=40&d=http%3A%2F%2F1.gravatar.com%2Favatar%2Fad516503a11cd5ca435acc9bb6523536%3Fs%3D40&r=G\")
Lars<\/cite> sagt:<\/span><\/div>\n21. M\u00e4rz 2016 um 10:23<\/div>\n\n
<\/p>\n
<\/p>\n
Thanks\u2026implemented in Version B.14<\/p>\n<\/div>\n<\/div>\n
<\/li>\n<\/ul>\n<\/li>\n<\/ul>\n<\/li>\n<\/ul>\n<\/li>\n
<\/p>\n
<\/p>\n
Hallo,<\/p>\n
das Projekt finde ich super!
\nIch f\u00e4nde noch folgende Funktionen f\u00fcr die letzte Ausbaustufe gut:
\n* Abspeichern der GUI settings auf MicroSD (vielleicht 3 presets ausw\u00e4hlbar o.\u00e4.)
\n* Screenshots auf MicroSD<\/p>\n
Gru\u00df
\nLars<\/p>\n<\/div>\n<\/div>\n
<\/p>\n
\n- \n
\n![\"\"](\"http:\/\/0.gravatar.com\/avatar\/67426419ead44d5afa132e92685bb460?s=40&d=http%3A%2F%2F0.gravatar.com%2Favatar%2Fad516503a11cd5ca435acc9bb6523536%3Fs%3D40&r=G\")
admin_ub<\/cite> sagt:<\/span><\/div>\n21. M\u00e4rz 2016 um 18:25<\/div>\n\n- \n
\n![\"\"](\"http:\/\/1.gravatar.com\/avatar\/75b71ed1a11b37472a00800e6c9daaa8?s=40&d=http%3A%2F%2F1.gravatar.com%2Favatar%2Fad516503a11cd5ca435acc9bb6523536%3Fs%3D40&r=G\")
Jet Lee<\/cite> sagt:<\/span><\/div>\n30. M\u00e4rz 2016 um 21:49<\/div>\n\n
<\/p>\n
<\/p>\n
gute Ideen,
\nSetup auf SD-Karte macht eigentlich keinen Sinn (w\u00fcsste nicht wozu)
\nim externen Flash sind die besser aufgehoben.
\nScreenshot auf SD ist notiert.<\/p>\n<\/div>\n<\/div>\n
<\/li>\n<\/ul>\n<\/li>\n
<\/p>\n
<\/p>\n
I\u00b4m very interested in this project. Is it possible to add function \u201crecorder\u201d?
\nFor example the wave form could be recorded for 1 min. to 2 min.:
\n\u201cStart\/stop\u201d could be triggered automatically or manually, or \u201cstart\u201d can be triggered but \u201cstop\u201d will be done after set time.<\/p>\n<\/div>\n<\/div>\n
<\/p>\n
\n- \n
\n![\"\"](\"http:\/\/0.gravatar.com\/avatar\/67426419ead44d5afa132e92685bb460?s=40&d=http%3A%2F%2F0.gravatar.com%2Favatar%2Fad516503a11cd5ca435acc9bb6523536%3Fs%3D40&r=G\")
admin_ub<\/cite> sagt:<\/span><\/div>\n1. April 2016 um 19:56<\/div>\n\n- \n
\n![\"\"](\"http:\/\/0.gravatar.com\/avatar\/e722f45d4a7418a88b0b5c29c19f2ffb?s=40&d=http%3A%2F%2F0.gravatar.com%2Favatar%2Fad516503a11cd5ca435acc9bb6523536%3Fs%3D40&r=G\")
Simko Gyorgy<\/cite> sagt:<\/span><\/div>\n1. April 2016 um 09:24<\/div>\n\n
<\/p>\n
<\/p>\n
you can generate a lot of data in 2 minutes\u2026what sample rate do you need ?<\/p>\n<\/div>\n<\/div>\n
<\/li>\n<\/ul>\n<\/li>\n
<\/p>\n
<\/p>\n
Hello<\/p>\n
You think that you should incorporate averaging?<\/p>\n
regards, George<\/p>\n<\/div>\n<\/div>\n
<\/p>\n
\n- \n
\n![\"\"](\"http:\/\/0.gravatar.com\/avatar\/67426419ead44d5afa132e92685bb460?s=40&d=http%3A%2F%2F0.gravatar.com%2Favatar%2Fad516503a11cd5ca435acc9bb6523536%3Fs%3D40&r=G\")
admin_ub<\/cite> sagt:<\/span><\/div>\n1. April 2016 um 19:58<\/div>\n\n- \n
\n![\"\"](\"http:\/\/0.gravatar.com\/avatar\/4df08c1746874f0e9c917150b3844d22?s=40&d=http%3A%2F%2F0.gravatar.com%2Favatar%2Fad516503a11cd5ca435acc9bb6523536%3Fs%3D40&r=G\")
Marc Rupprath<\/cite> sagt:<\/span><\/div>\n28. September 2016 um 06:59<\/div>\n\n
<\/p>\n
<\/p>\n
yes..and a measurement function\u2026and a FFT function\u2026and a programmable trigger function\u2026![\":-)\"](\"http:\/\/mikrocontroller.bplaced.net\/wordpress\/wp-includes\/images\/smilies\/icon_smile.gif\")
<\/p>\n<\/div>\n<\/div>\n
\nand a serial decoder\u2026and a function generator\u2026so still a lot of work to do
<\/li>\n<\/ul>\n<\/li>\n
<\/p>\n
<\/p>\n
Guten Tag,
\nWie haben Sie die Oberfl\u00e4che erstellt?
\nWelche Tools verwenden Sie ?<\/p>\n
Danke f\u00fcr Ihre M\u00fche f\u00fcr diese Seite und Ihre Tollen Projekte![\";-)\"](\"http:\/\/mikrocontroller.bplaced.net\/wordpress\/wp-includes\/images\/smilies\/icon_wink.gif\")
<\/p>\n
Gru\u00df<\/p>\n
Marc Rupprath<\/p>\n<\/div>\n<\/div>\n
<\/li>\n<\/ol>\n","protected":false},"excerpt":{"rendered":"
Das Oszi-Projekt f\u00fcr das STM32F746-Disco Board ist im Moment noch in der Beta Phase also noch nicht fertig. Bilder : Mode : \u201cnormal\u201d Channel settings Trigger settings Cursor settings Global settings Cursor Y-axis Cursor X-axis max 4 Channels … Weiterlesen →<\/span><\/a><\/p>\n","protected":false},"author":1,"featured_media":0,"parent":591,"menu_order":24,"comment_status":"open","ping_status":"closed","template":"","meta":{"footnotes":""},"categories":[134,130],"tags":[288,268,167,105,106],"class_list":["post-789","page","type-page","status-publish","hentry","category-show-projekte","category-stm32f746","tag-oscilloscope","tag-oszi","tag-projekt","tag-stm32f746","tag-stm32f746gdiscovery"],"_links":{"self":[{"href":"https:\/\/mikrocontroller.bplaced.net\/wordpress\/wp-json\/wp\/v2\/pages\/789","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/mikrocontroller.bplaced.net\/wordpress\/wp-json\/wp\/v2\/pages"}],"about":[{"href":"https:\/\/mikrocontroller.bplaced.net\/wordpress\/wp-json\/wp\/v2\/types\/page"}],"author":[{"embeddable":true,"href":"https:\/\/mikrocontroller.bplaced.net\/wordpress\/wp-json\/wp\/v2\/users\/1"}],"replies":[{"embeddable":true,"href":"https:\/\/mikrocontroller.bplaced.net\/wordpress\/wp-json\/wp\/v2\/comments?post=789"}],"version-history":[{"count":12,"href":"https:\/\/mikrocontroller.bplaced.net\/wordpress\/wp-json\/wp\/v2\/pages\/789\/revisions"}],"predecessor-version":[{"id":2706,"href":"https:\/\/mikrocontroller.bplaced.net\/wordpress\/wp-json\/wp\/v2\/pages\/789\/revisions\/2706"}],"up":[{"embeddable":true,"href":"https:\/\/mikrocontroller.bplaced.net\/wordpress\/wp-json\/wp\/v2\/pages\/591"}],"wp:attachment":[{"href":"https:\/\/mikrocontroller.bplaced.net\/wordpress\/wp-json\/wp\/v2\/media?parent=789"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/mikrocontroller.bplaced.net\/wordpress\/wp-json\/wp\/v2\/categories?post=789"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/mikrocontroller.bplaced.net\/wordpress\/wp-json\/wp\/v2\/tags?post=789"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}